For the accurate marking of centres prior to drilling. All punches
are manufactured from quality tool steel, the heat treated points
are precision ground, chamfered at 60 degrees for accurate marking.
Packed Individually or as sets in PVC wallets with header cards
and Euro slots for tool bar display Round Head Centre Punches
Catalogue No. |
Dia above point |
Length "A" |
124 |
1/16" (1.6mm) |
4' (100mm) |
124 |
3/32" (2.4mm) |
4" (100mm) |
124 |
1/8" (32.mm) |
4" (100mm) |
124 |
5/32" (4.0mm) |
4" (100mm) |
124 |
3/16" (4.8mm) |
4" (100mm) |
124 |
1/4" (6.4mm) |
4" (100mm) |
124 |
3/8" (9.5mm) |
6" (150mm) |
124 |
1/2" (12.7mm) |
7" (180mm) |
Square Head Centre Punches
Catalogue No. |
Dia above point |
Length "A" |
44 |
1/16" (1.6mm ) |
4" (100mm) |
44 |
3/32" (2.4mm) |
4" (100mm) |
44 |
1/8" (3.2mm) |
4" (100mm) |
44 |
5/32" (4.00mm) |
4" (100mm) |
44 |
3/16" (4.8mm) |
4" (100mm) |
44 |
1/4" (6.4mm) |
4" (100mm) |
44 -SC4 |
Set of Four | |
Set of 4 comprises 1/16", 3/32", 1/8", 3/16" Automatic Centre PunchCatalogue No. 271 Length "A" (125mm) No hammers required with this tool, simply apply hand
presure and an acurate blow is delivered. The amount of force delivered
can be adjusted by simply rotating the end cap. Punch & Scriber Merchandiser This universal design can be used on a counter top, slat wall tool
bars and peg board tool bars. Catalogue No. MD 001 |